| Stainless steel flexible flue liners are designed for lining an existing flue or masonry chimney. Gas and oil flexible flue liners are manufactured out of single strip 316 grade stainless steel and are designed for atmospheric gas and kerosene appliances where the flue gas temperature does not exceed 260°C.
- 316 stainless steel single strip construction
- For use inside masonry chimneys only
- Residential and commercial installations
- Gas and 28 sec. oil applications
- Diameters from 80mm to 500mm
- CE Approved to EN 1856-2 Designation T600 N1 W V2 L50010 G
Email for Quote
|
| | Stainless steel flexible flue liners are designed for lining an existing flue or masonry chimney. Multifuel flexible is a twin skin chimney liner designed for gas, oil and multifuel, where the maximum flue gas temperature does not exceed 600°C. There are two grades available, 316L and a higher grade of 904L which is suitable for the extreme conditions found with coal based solid fuel installations.
- 316 or 904 grade stainless steel twin skin construction
- For use inside masonry chimneys only
- Residential and commercial installations
- Class 1 multi fuel applications
- Diameters from 80mm to 405mm
- CE Approved to BSEN 1856-2
- Designations 316 = T600 N1 W V2 50012 G (High Temp. Applicatons), T200 P1 W V2 L50012 O (Low Temp. Applications)
- Designations 904 = T600 N1 W V2 L70012 G (High Temp. Applications), T200 P1 W V2 L70012 O (Low Temp. Applications)
|
| |